2025 Nelsen Corporation Catalog - Catalog - Page 109
SBG2-HP
ResinTech SBG2-HP is a high purity chloride
form type 2 gel strong base anion resin. The
HP (high purity) designation means it is Gold
Seal Certified by the WQA for use in potable
water applications. The amine used in type
2 anion resins makes them less prone to
taste and odor than type 1 resins. SBG2-HP
is intended for potable water use for the
removal of contaminants such as nitrate,
arsenate, chromate, uranium, etc.
NITRATE REMOVAL - ResinTech SBG2-HP can be
used in the chloride cycle to reduce nitrates along with
sulfates. Regeneration is accomplished with sodium
chloride brine, in a fashion similar to water softeners.
Although high operating capacities and high salt
efficiency can be obtained, there is also the possibility
of nitrate dumping. Use of chloride form anion resin
reduces pH during the early portion of the exhaustion
cycle. When treating waters with high hardness the brine
dilution and displacement waters should be softened
and a low hardness salt used to prevent scaling during
regeneration.
SBG2-HP
NSF/ANSI/CAN 61: Drinking
Water System Components Health Effects
SBG2-HP is intended for potable water use for the removal of contaminants such as nitrate, arsenate,
chromate, uranium, etc
Pallet quantity - 42 bags per pallet
SBG2-HP
Strong Base Anion Nitrate Resin, 1 Cu Ft Bag (47.2 lbs)
ASM-10-HP
ResinTech ASM-10-HP is a chloride form
arsenic selective hybrid anion exchange
resin. ASM-10-HP has hydrated iron oxide
monoatomically dispersed throughout
the polymer giving the product hybrid
properties and exceptional capacity for
certain anions. ASM-10-HP is intended
for arsenic removal although it does
remove uranium and other trace level
contaminants. ASM-10-HP has been Gold
Seal Certified by the WQA for use in
potable water applications.
ARSENIC REMOVAL - Under ideal conditions ResinTech
ASM-10-HP will reduce 50 ppb of arsenate to less than
10 ppb for more than 500,000 gallons per cubic foot.
Limiting factors are high pH, high silica concentration,
and high sulfate concentration. Capacity can also be
reduced by intermittent operation and various foulants,
notably suspended solids.
SILICA REMOVAL - ResinTech ASM-10-HP can be used
at moderate pH to remove silica. At a flow rate of 0.5
BV/min, removal efficiency of ninety percent is possible
for several hundred bed volumes of throughput. Silica
does not dump as the resin exhausts. Even though silica
removal is not complete, some lowering of silica occurs
for hundred of thousands of bed volumes.
ASM-10-HP
NSF/ANSI/CAN 61: Drinking
Water System Components Health Effects
ASM-10-HP is intended for arsenic removal although it does remove uranium and other trace level
contaminants.
ASM-10-HP
Hybrid Strong Base Anion Asrsenic Select Resin, 1 Cu Ft Box (52.15 lbs)
ASM-10-HP-50-BOX
Arsenic Select Resin, 1/2 CF Box
Call Nelsen Toll-Free from Anywhere in the U.S. - 800.362.9686
All prices and products subject to change without notice. ©Nelsen Corporation
4- 7
Resins, Media & Chemicals
ResinTech Anion Selective Resins 4
