2025 Nelsen Corporation Catalog - Catalog - Page 147
Solution Tanks, Flow Switches, Enclosed Mixers 5
15 Gallon Gray
15 Gallon Natural
35 Gallon Gray
35 Gallon Natural
6115-CAP
Solution Tank Replacement Cap
6140
6175
40 Gallon
75 Gallon (Black)
6155
55 Gallon w/Top Mount Cover
6115-GRAY & 6115-NAT
Thomas Products Flow Switch
These versatile Flow Controller switches may be used to establish flow/no flow control of metering pumps
in various applications. These pre-wired, self-contained flow switches were specifically designed for the
Water Treatment industry. Turns feed pump on at 0.5 GPM with a max operating pressure of 150 PSIG.
FC1801
1" Flow Switch, Pre-Wired
FC2601
2" Flow Switch, Pre-Wired
FC1801
Grid Controls Flow Switch
Water Flow switch features a low flow operation with 10 amp set
point on 1.0 gpm and up. Connections are 1/2" electrical conduit
connection and standard 1" PVC slip fittings inlet and outlet. Line
pressure to 60 psi. maximum and temperature to 110°F continuous.
Wetted surfaces - PVC, Polypropylene, Buna N, Stainless steel.
M210-100
1" Flow Switch/60 psi
M310-100-PW
1" Flow Switch, Pre-wired, 100
M310-220
1" Flow Switch, 220 Volt, 100 psi
M310-100-PW
M210-100
Bulkhead Fitting
Connects through the sidewall of solution tanks.
CTA54P
Bulkhead Fitting
Totally Enclosed Mixers (Other Types Available)
42747-B-M-TE-H
42748-F-M-TE-H
All mixers feature a 316 stainless steel shaft with an integral impeller. Special epoxy and vinyl shaft
coatings are available for applications where the solution being agitated is not compatible with 316
stainless steel. The shaft is coupled to the motor via a brass adapter which is held securely by four
stainless steel set screws.
When mixing sodium hypochlorite (chlorine) order vinyl shaft coating for the above mixers.
BRACKET MOUNT
The Bracket Mount Mixer provides a means of mounting a mixer to a tank cover or other flat surface.
Four 18/8 stainless steel bolts and two rugged 3/8" thick steel brackets hold the mixer securely in place,
requiring no additional mixer supports.
42747-B-M-TE-H
1/20 hp Bracket MT, 28" Shaft
FLANGE MOUNT
The Flange Mount Mixer provides a convenient and economical means of mounting smaller mixers. The
flange mount allows the mixer to be mounted directly to the tank cover or other flat surface eliminating
the need for an additional mixer support.
42748-F-M-TE-H
1/20 hp Flange MT, 28" Shaft
Call Nelsen Toll-Free from Anywhere in the U.S. - 800.362.9686
All prices and products subject to change without notice. ©Nelsen Corporation
5- 9
Disinfection - Feed Pumps
Chemical Solution Tanks
6115-GRAY
6115-NAT
6135-GRAY
6135-NAT
