2025 Nelsen Corporation Catalog - Catalog - Page 177
Aquatec Pumps & Accessories 7
Aquatec Pumps And Accessories
HIGH FLOW BOOSTER PUMP - 50 to 100 GPD
Designed with the same features as the standard booster pump, the high-flow pump handles
membranes from 50 to 100 GPD. Select transformer and pressure switch separately.
CDP8800
Aquatec Booster Pump, 50 -100 GPD
Reverse Osmosis
STANDARD BOOSTER PUMP
This low-voltage pump is designed to operate continuously at near constant pressure until
the product water tank is full. The output pressure is dependent on the reverse osmosis
system's total flow requirement, feed-water pressure and available power source. This pump
is typically used with under the counter RO systems that have built-in flow controllers. Twoyear warranty. Handles up to 50 GPD membranes. Select transformer and pressure switch
separately.
CDP6800
Aquatec Booster Pump, 50 GPD
HIGH FLOW BOOSTER PUMP 500 to 1000 GPD
The Aquatec 5300 is a 3-chamber diaphragm pump, self-priming, and dry run tolerant.
Typical applications include light commercial feedwater boost for 500 – 1000 gpd reverse
osmosis and other filtration technologies as well as carbonation.
CDP5300
Aquatec Booster Pump, 500 - 1000 GPD
DELIVERY PUMP
Aquatec's DDP5831-134 delivery pump is typically used to transfer water at .6 gpm from a
storage tank to a remote appliance such as a coffee maker, ice maker, refrigerator, faucet, etc.
Includes a built-in pressure sensing demand switch. Select transformer separately.
DDP5831-134
Aquatec Delivery Pump .6 GPM
PERMEATE PUMP
This pump is capable of improving the recovery rate by as much as 400% under
normal use, while reducing waste water by as much as 80%. The Permeate Pump
increases the net pressure across the RO membrane by isolating the membrane
pressure from the pressure in the product water tank, thereby reducing the
permeate back-pressure to less than 5 psi. Select mounting clip separately.
ERP-500
Aquatec Permeate Pump, 10-50 gpd w/Clip
ERP-1000
Permeate Pump, 10-100 gpd
PPC-1000
Permeate Pump Clip for ERP-1000Pump
TRANSFORMERS
TACS-114-48
CDP8800 & DDP5831-134
Transformer, 115v,
2.0 Amp
TAS-114-19
CDP6800 Transformer,
115v, 0.8 Amp
TANK PRESSURE SWITCHES
20-PWS-002
PSW-240
CDP5300 Transformer, Tank Pressure Switch, 1/4"
110V in - 24v out, 6.7 amp
Call Nelsen Toll-Free from Anywhere in the U.S. - 800.362.9686
All prices and products subject to change without notice. ©Nelsen Corporation
PSW-340
Tank Pressure Switch,
3/8"
7 - 15
