2025 Nelsen Corporation Catalog - Catalog - Page 258
10 Residential Distribution Risers & Tubing, Autotrol Turbulators
Mineral Tanks, Internals & Acces.
BASKET RISERS
BRT1316-54
13/16" x 54" Basket Riser
BRT1050-54
1.05" x 54" Basket Riser
BRT1050-12.25
1.05" x 12¼" Basket Riser
BRT1050-44
1.05" x 44" Basket Riser
BRT1050-48.25
1.05" x 48¼" Basket Riser
BRT1050-53.5
1.05" x 53½" Basket Riser
FINE MESH RISER
STRAIGHT RISERS
STRAIGHT RISERS
HOT WATER RISER
BRT1050-54-FR
1.050" x 54" Fine
Mesh Basket Riser
RT1316-55S
Straight Riser, Slotted 13/16" x 55"
RT1050-60S
Straight Riser, Slotted 1.05" x 60"
BRT1050-54-HW
1.05" x 72" Hot
Water Riser
DISTRIBUTOR TUBING
DT1316
DT1050
DT32MM-72
DT1050-41
DT1050-41.5
DT1050-42.375
DT1050-50.75
DT1050-51.875
DT1050-52.5
DT1320-64.5
13/16" Tubing (Per Inch)
1.05" Tubing (Per Inch)
32 MM Tubing 72" Stick, No Basket
1.05" x 41" Dist. Tubing
1.05" x 41-1/2" Dist. Tubing
1.05" x 42-3/8" Dist. Tubing
1.05" x 50¾" Dist. Tubing
1.05 x 51.875, Dist. Tubing 10" Vor Tank
1.05" x 52½" Dist. Tubing
1.32" Tubing, 64.5" Stick, No Basket
The “Finger”
Are you tired of your Basket Risers pulling out of the tank
on re-beds? Give them the Finger!
The Finger is designed to attach to the top of basket risers and
distributor tubes of 1.05" and prevent the tube from rising out
of the tank when the control valve is removed for service or
re-bedding the system.
Attach the Finger to the top of the distributor tube and
insert it in the tank. The Finger has two hooks to pull
it up to the top of the inside of the tank. Tighten the
screw in the Finger, and you’re done!
THE FINGER
1.05" Distributor Holding Device
Autotrol Turbulators
TURBULATOR KIT
TURBULATOR ASSEMBLIES
During backwash, with a
Turbulator, resin granules are
propelled from the bottom
of the resin tank to the top.
This allows a complete turn
over of the resin bed and
complete contact with the
brine solution. Small particles
of dirt and iron are freed from
the bed and flow to the drain.
Includes riser pipes ready to install.
TURB210
Turbulator Kit, for 1.05" Riser
TURB-1354-1050 - 80,000, 1.05"
10 - 6
TURB-0844-1050 - 24,000, 1.05"
TURB-0948-1050 - 32,000, 1.05"
TURB-1035-1050 - For 35" Tanks 1.05"
TURB-1044-1050 - 40,000, 1.05"
TURB-1054-1050 - 48,000, 1.05"
TURB-1248-1050 - 64,000, 1.05"
TURB-1465-1050 - 110,000, 1.05"
For more information visit – NelsenCorp.com • NelsenWaterSolutions.com • VESTAwater.com
All prices and products subject to change without notice. ©Nelsen Corporation
