2025 Nelsen Corporation Catalog - Catalog - Page 267
Poly Tubing, Micro Clamp, Drain Line Air Gaps 10
All Polyethylene tubing is made of 100% virgin, low density, pure polyethylene resin - the
engineering material that is non-toxic (meeting FDA standards), tasteless and odorless. 100' Coils
except where noted.
PT02
1/4" O.D.
PT03
3/8" O.D.
PT03-50
3/8" O.D., 50 foot coil.
PT05
1/2" O.D.
PT05-BLACK
1/2" O.D.
PT06
5/8" O.D.
PT06-50
5/8" O.D., 50 foot coil.
PT06-25
5/8" O.D., 25 foot coil.
PT06-BLACK
5/8" O.D. x 1/2" I.D. Black
PT06
PT06-BLACK
Ideal All-Stainless Steel Clamps
6208 SERIES
All stainless Micro-Gear. Band and housing of 300 series stainless steel. Screw is 1/4 inch, 400
series stainless.
62606
5/16" through 7/8"
62606
Drain Line Air Gaps
DLA-D38QC
DLA-G-58JP
The DLA-D Universal Drain Line Adapter is
designed for installation on all garbage disposals where the dishwasher drain inlet is located.
Universal adapter accommodates 1/2", 5/8", 3/4"
or 7/8" dishwasher drain hose. Can be used
with or without a dishwasher drain line connection. Comes in kit form with all the fittings and
instructions needed for installation.
DLA-D38QC
RO drain to disposal kit, 7/8" barb x 3/8" JG
Multipurpose standpipe Air Gap is designed
for residential & commercial water softeners
and RO’s. Connects softener and RO drains to
all material Sch.-40 standpipes. Uses standard
plumbing fittings to meet code requirements
nationwide. Comes in kit form with all the fittings
and instructions needed for installation.
DLA-G-58JP
RO drain to standpipe kit, 1-1/2" Slip x 5/8" Jaco
GAP-A-FLOW
MISTER DRAIN
These drain line air gaps feature 1/2" MIPT and 1/4" FIPT threads
at inlet and 3/4" MIPT and 3/8" FIPT threads at outlet. They can be
installed vertically or at a lesser angle down to 45 degrees.
A clamp groove and clamp are provided for securing the part to
the wall.
GAF-21
Airgap, Standard Unit
Fits 1 1/2" or 2" standpipes. Unit housing length
approximately 5 1/2". Recommended usage 1 to
7 gallons/minute. Tested at 15 gallons/minute
(56.8 liters/minute). Allows soft rubber washer
hose or washer metal drain hook to share
standpipe with other Air Gap units Inlet port fits
1/2 SCH 40 PVC slip fittings or special couplings.
Provides more than twice the code-required
minimum air gap opening. Can be mounted at 3
different levels.
MD-10A
Plastic Drain Adapter
Call Nelsen Toll-Free from Anywhere in the U.S. - 800.362.9686
All prices and products subject to change without notice. ©Nelsen Corporation
10 - 15
Mineral Tanks, Internals & Acces.
Polyethylene Tubing
