2025 Nelsen Corporation Catalog - Catalog - Page 312
14 WS2, WS2QC, & NWS-20 Injector Valve Body Assembly
Nelsen Water, Clack, C-Series
*Any C3162-XXX flow control may be
used. WS2 valves are shipped with a
C3162-022 (2.2 gpm) flow control. Flow
control sizes range from 0.7 up to 10
gpm. WS2 valves can only be set for
minutes of fill because various sizes of
flow controls can be used.
Backwash Only
CL3149
CL3499 Cap
installed from factory.
To calculate for pounds or kilograms of
salt, take minutes of fill times the flow
rate of the flow control being used to
arrive at the number of gallons of water
be added to the brine tank. Each gallon
of water will dissolve approximately 3
pounds of salt.
CL3151
**Use of C4915 may severely reduce
brine draw rates.
CL3150
A C3731 WS2 INJ DRAW TUBE DOWN ASY
contains one C1262 O-RING 118 and two
C3639 O-RING 119.
CL3105
A C3730 WS2 INJ FEED TUBE DOWN ASY
contains three C3638 O-RING 113.
C3010-2X injectors and the
C3010-15ADAPTER contain a C3283
O-RING 117 and a C3284 O-RING 114.
The C3010-15ADAPTER can be used
with any C3010-15X injector so the 2"
CL3231
valve can be used on smaller tank sizes.
The C3010-15X injector contains one
CL-WASHER07-** C3416 O-RING 012 (lower) and one C3171
O-RING 013 (upper).
CL3277
Proper RFC orientation
directs refill water flow
toward the washer face
with radius and text.
Water Flow
Backwash Only Valves include a C3499
but do not include the following parts:
C3189, C4915, C3162-022, C3231
and C3277.
CL3643
CL3315
CL3730
CL3724
CL3477
CL3152
CL3731
CL3727
CINJ-15C
CINJ-15D
CINJ-15E
CINJ-15F
CINJ-15G
CINJ-15H
14 - 8
CINJ-2A
CINJ-2B
CINJ-2C
CINJ-2D
CINJ-2E
CINJ-2F
CINJ-2G
For more information visit – NelsenCorp.com • NelsenWaterSolutions.com • VESTAwater.com
All prices and products subject to change without notice. ©Nelsen Corporation
