2020 Web Catalog - Flipbook - Page 165
In-line Chemical Mixers, Solution Tanks, Flow Swtiches, Enclosed Mixers
For complete mixing, include a static mixer. These are in-line tubes with baffles that cause a high
degree of mixing. In a static mixer, turbulence disrupts the water stream exposing a much greater
surface area. Because a “mixed” surface area is much greater, chemical reactions are much faster
and, in many cases, nearly instantaneous.
MA-4 1" In-line Mixer
Chemical Solution Tanks
15 Gallon Blue
15 Gallon Natural
35 Gallon Blue
35 Gallon Natural
6115-CAP Solution Tank Replacement Cap
* 6130 30 Gallon
* 6140 40 Gallon
* 6175 75 Gallon (Black)
* 6135 30 Gallon w/Top Mount Cover
* 6155 55 Gallon w/Top Mount Cover
6115 & 6115-NAT
Thomas Products Flow Switch
These versatile Flow Controller switches may be used to establish flow/no flow control of metering pumps in various applications. These pre-wired, self-contained flow switches were specifically
designed for the Water Treatment industry. Turns feed pump on at 0.5 GPM with a max. Operating
pressure of 150 PSIG.
FC1801 1" Flow Switch, Pre-Wired
FC2601 2" Flow Switch, Pre-Wired
Grid Controls Flow Switch
Water Flow switch features a low flow operation with 10 amp set point on 1.0 gpm and up. Connections are 1/2" electrical conduit connection and standard 1" PVC slip fittings inlet and outlet. Line
pressure to 60 psi. maximum and temperature to 110°F continuous. Wetted surfaces - PVC, Polypropylene, Buna N, Stainless steel.
M210-100 1" Flow Switch/60 psi
M310-100-PW 1" Flow Switch, Pre-wired, 100
M310-220 1" Flow Switch, 220 Volt, 100 psi
Connects through the sidewall of solution tanks.
Totally Enclosed Mixers (Other Types Available)
All mixers feature a 316 stainless steel shaft with an integral impeller. Special epoxy and vinyl shaft
coatings are available for applications where the solution being agitated is not compatible with 316
stainless steel. The shaft is coupled to the motor via a brass adapter which is held securely by four
stainless steel set screws.
When mixing sodium hypochlorite (chlorine) order vinyl shaft coating for the above mixers.
The Bracket Mount Mixer provides a means of mounting a mixer to a tank cover or other flat surface.
Four 18/8 stainless steel bolts and two rugged 3/8" thick steel brackets hold the mixer securely in
place, requiring no additional mixer supports.
* 42747-B-M-TE-H 1/20 hp Bracket MT, 28" Shaft
The Flange Mount Mixer provides a convenient and economical means of mounting smaller mixers.
The flange mount allows the mixer to be mounted directly to the tank cover or other flat surface eliminating the need for an additional mixer support.
42748-F-M-TE-H 1/20 hp Flange MT, 28" Shaft
Call Nelsen Toll-Free — OHIO - 800.362.9686, ARIZONA - 866.445.4299, TEXAS - 855.674.0357 or FLORIDA - 866.712.6796
All prices and products subject to change without notice. ©Nelsen Corporation
Disinfection - Feed Pumps