2020 Web Catalog - Flipbook - Page 292
10 Commercial In/Out Tank Head & Basket, Resilite Test Lights, Distributor Heads, Drain Line Fittings
Fleck Upper Basket
Upper basket that screws into upper 2-1/2" heads or control valves with stainless steel screws.
Fleck Upper Basket w/SS Screws
Commercial In/Out Tank Head
This In/Out tank head features a 1-1/2" inlet and outlet and a 1-1/2" distributor opening. This head also
features a slotted upper basket, sold separately.
Noryl® In/Out Head, # 4112,
1-1/2" F x 1.5" O-Ring DIST Downflow
HEAD-APW4112-UPPER BASKET Noryl® In/Out Head, # 4112
Upper Basket Only
Mineral Tanks, Internals & Acces.
RESILITE LED TEST LIGHT
Resilite LED Test Lights
The patented Squarewave Resilite is a positive, reliable and economical method of monitoring water
quality via conductivity. Bright red/green visual output is easy to read. The monitoring is simple: the
green light indicates the water conductivity is below the threshold value, the red light warns that it
is above. Uses a wall transformer to convert 100v to 9v to insure safe operation and longer life. 220v
European is also available. When ordering make sure to specify conductance. Available in 2 Meg ohm,
1 Meg ohm, 500k, 200k, 50k, 20k, 10k and 5k.
1/2", 110 VOLT
1/2" 110V, 20k ohm Test Light
1/2" 110V, 50k ohm Test Light
1/2" 110V, 200k ohm Test Light
1/2" 110V, 500k ohm Test Light
1/2" 110V, 1 Meg ohm Test Light
3/4", 110 VOLT
3/4" 110V, 20k ohm Test Light
3/4" 110V, 50k ohm Test Light
3/4", 110V, 200k ohm Test Light
3/4" 110V, 500k ohm Test Light
3/4" 110V, 1 Meg ohm Test Light
DISTRIBUTOR HEAD FOR 1/2" TEST LIGHTS
The RA201-890 Distributor head is designed for installation of a 1/2" Resilite in single in-out applications on deionizers. The threaded opening on the outlet side places the monitoring electrodes into the
water flow for greatest accuracy.
Plastic with Brass Inserts, 3/4"
C-Series Plastic Distributor Heads
Designed for simple in-out filters such as pH neutralizers, carbon filters, etc. The C1190 head can be
used for Up-flow or Down-flow service. The head fits a standard 2½" NPSM tank thread and features
a 1.050" distributor opening. The C1190 features a drillable, pre-tapped ¼" FIPT vent port (found on
the C1190 only). The C1190FP is designed with a removable top, or fill port, and an internal screen.
The C1190FP internal screen is easily serviced and cleaned by using the service wrench, provided
with each head, to disassemble the head. The C1190 series heads require a C-Series fitting kit for a
proper plumbing connection. See Section 1 for optional fitting kits and option bypass valve. Note: For
upflow service with the optional bypass, it is necessary to mount the bypass upside down to maintain
all the bypass options.
In/Out Head w/Fill Port, inc. Wrench
Jaco Drain Line Fittings
FEMALE ELBOWS, TUBE X FIPT
3/8" Tube x 1/4" Female Elbow
3/8" Tube x Female Elbow
For more information visit – NelsenCorp.com
• Commercial.NelsenCorp.com •
All prices and products subject to change without notice. ©Nelsen Corporation