2020 Web Catalog - Flipbook - Page 452
16 WS2 Quick Connect Injector Valve Body Assembly
*Any C3162-XXX flow control may be
used. WS2 valves are shipped with a
C3162-022 (2.2 gpm) flow control. Flow
control sizes range from 0.7 up to 10
gpm. WS2 valves can only be set for
minutes of fill because various sizes of
flow controls can be used.
installed from factory.
To calculate for pounds or kilograms
of salt, take minutes of fill times the
flow rate of the flow control being used
to arrive at the number of gallons of
water be added to the brine tank. Each
gallon of water will dissolve approximately 3 pounds of salt.
**Use of C4915 may severely reduce
brine draw rates.
A C3731 WS2 INJ DRAW TUBE
DOWN ASY contains one C1262 ORING 118 and two C3639 O-RING 119.
A C3730 WS2 INJ FEED TUBE DOWN
ASY contains three C3638 O-RING 113.
C3010-2X injectors and the
C3010-15ADAPTER contain a C3283
O-RING 117 and a C3284 O-RING 114.
The C3010-15ADAPTER can be used
with any C3010-15X injector so the 2"
valve can be used on smaller tank sizes.
The C3010-15X injector contains one
C3416 O-RING 012 (lower) and one
C3171 O-RING 013 (upper).
Proper RFC orientation
directs refill water flow
toward the washer face
with radius and text.
C-Series, Signature, Clack
Backwash Only Valves include a
C3499 but do not include the following
parts: C3189, C4915, C3162-022, C3231
For more information visit – NelsenCorp.com
• Commercial.NelsenCorp.com •
All prices and products subject to change without notice. ©Nelsen Corporation